SEARCH

Found 4303 related files. Current in page 1

pcv valve location on 1993 ford ranger with 2 3

Vacuum Brake Booster Testing and Diagnosis.pdf

Vacuum Brake Booster Testing and Diagnosis Vacuum Brake Booster Testing and Diagnosis This procedure will require the use of a hand operated vacuum pump with a vacuum gauge. If you do not own one it can often be rented or borrowed from most “big box” parts stores. (Note: 18”HG is the minimum engine vacuum at idle in gear to effectively operate a vacuum booster 1) Remove vacuum hose from check valve on booster. Place hose from vacuum pump onto check valve and draw booster to 20” of vacuum. 2) Let booster sit with vacuum applied for 5 minutes. If vacuum does not stay steady at 20” it is faulty and needs to be replaced. If vacuum does hold steady at 20” proceed to step 3. 3) With 20” of vacuum in booster depress brake pedal once and release it. The booster should transfer some but not the entire vacuum in reserve. Depending on how hard the pedal is depressed it is normal to see 5-10” of vacuum depleted from reserve. The most important thing is to ensure the booster does transfer vacuum but does NOT transfer the entire vacuum in its reserve. If vacuum remains at 20” OR goes to zero the booster is bad and will need to be replaced. If vacuum transfer is within the above parameter proceed to step 4. 4) Once again draw booster down to 20” of vacuum. Go inside car and depress brake pedal and hold down for 30 seconds. You should see the gauge drop slightly and then hold steady. Vacuum should stay steady as long as you are holding the pedal down. If vacuum drops while pedal is being held down the booster is faulty and will need to be replaced.

BPI 10-06 Temporary reduction in power brake ... - Raybestos Brakes

No. BPI 10-06 Subject: Temporary reduction in power brake assist in extreme cold weather Vehicles Involved: Models: 2009 BUICK ENCLAVE 2009 CHEVROLET TRAVERSE 2009 GMC ACADIA 2009 SATURN OUTLOOK From 9J100008 From 9S100002 From 9J100016 From 9J100003 to to to to 9J190898 9S143268 9J190899 9J190888 Condition: If the brake check valves are NOT installed correctly, an increased amount of brake pedal effort will be required to obtain brake function, and the brake assist system will NOT perform as designed. Repair: Replace the first design brake booster vacuum hose check valve (1) with a second design brake booster vacuum hose check valve (2). An arrow on the second design check valve indicates the vacuum draw direction (3). 1. Remove the fuel injector sight shield (engine cover) from the engine. 4400 Prime Parkway McHenry, IL 60050  (815) 363-9000 Determine where the two brake booster vacuum hose check valves are located. Refer to callouts 1 and 2 in the illustration 2. Release the quick connect (4) from the power brake booster auxiliary pump (3). 3. Remove the protective wrap (5) from the brake booster vacuum hose to locate check valve # (1). 4400 Prime Parkway McHenry, IL 60050  (815) 363-9000 4. Remove the check valve (1) from the brake booster vacuum hose that routes to the power brake booster auxiliary pump (3). 5. Remove the check valve (2) from the brake booster hose that routes to the intake manifold vacuum port (6). Note If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the vacuum hose to the manifold vacuum port. Do not use soap. 6. Install a new check valve (1) to the brake booster hose that routes to the power brake booster auxiliary pump (3). Ensure the arrow on the check valve (1) ...

Brake Booster - Subaru Outback Forums
by moncoZ 0 Comments favorite 3 Viewed Download 0 Times

(2) Four brake booster installation nuts A: REMOVAL 1) Remove or disconnect the following parts in the engine compartment. (1) Disconnect the connector of brake fluid level gauge. (2) Remove the brake pipe from the master cylinder. (3) Remove the master cylinder installation nut. (1) CAUTION: In order to prevent the contact of the bracket and check valve, be sure to loosen the master cylinder mounting nut while holding the bracket with hand. Otherwise it may deform the bracket. (1) Check valve (2) Bracket (4) Disconnect the vacuum hose from brake booster. 2) Remove the following parts from the pedal bracket. (1) Snap pin and clevis pin Nut Clevis pin Snap pin Operating rod Brake pedal 3) Remove the brake booster while avoiding the brake pipe. NOTE: • Make sure that the booster shell and vacuum pipe are not subject to strong impacts. • Be careful not to drop the brake booster. If the booster is dropped, replace it. • Use special care when handling the operating rod. If excessive force is applied to the operating rod, the angle may change by r3°, and it may result in damage to power piston cylinder. • Be careful when placing the brake booster on floor. • Do not change the push rod length. CAUTION: • Do not disassemble the brake booster.

Chase Bays 240sx Booster Delete Brake Line ... - Chase Bays, Inc

Chase Bays 240sx Booster Delete Brake Line Relocation Kit Install Guide What is included? •(1) Stainless steel engine bay hard line •(6) Stainless braided/Teflon coated crimped brake lines •(1) -­‐3AN Bulkhead Tee fitting (Gold in color) •(1) Female -­‐3AN Tee Fitting w/ male fitting on leg (Black in color) •(2) Straight -­‐3AN Bulkheads (1) 90 degree -­‐3AN Bulkhead (4) Bulkhead nuts •(1) -­‐3AN tube nut (for rear line) •(1) -­‐3AN tube sleeve (for rear line) •(1) Wilwood Proportioning Valve with -­‐3AN male fittings •Uninstall all OEM Brake hard lines and Booster/Master Cylinder. •Install your Chase Bays Brake Booster Delete Kit. Start with drilling your engine bay hole. Install the hard line to help line up the hole correctly.

Suzuki Hayabusa & GSX-R 1000 Cylinder Head ... - Vance & Hines

Suzuki Hayabusa & GSX-R 1000 Cylinder Head Price Sheet Vance & Hines Motorsports has the experience and most up to date computer controlled machines for every facet of engine preparation and performance parts. Byron Hines engines and pro heads have set more records and won more races than anyone else in motorcycle drag racing. Vance & Hines Motorsports also offers comprehensive head packages for Road Racing, Motorcross and Supercross engines. Hayabusa Heads Pro Port $1,320.00 Street Port $ 625.00 Competition Valve Job & Drop Valve Guides $ 375.00 Competition Valve Job $ 375.00 Surface $ Surface $ 60.00 $1,755.00 60.00 $1,060.00 Optional Parts & Service • • • • • • • • Weld Emission Ports Cam Cut (Cam Caps) (.425 Lift & above) 99-07 Spring Kit with Titanium Retainers 08 Spring Kit with Titanium Retainers Valve Seals Stainless Steel Oversize Valves Camshafts Adjustable Cam Sprockets $ 100.00 $ 150.00 $ 365.63 $ 399.00 $ 45.00 $ 360.00 $ 698.00 $ 145.00 GSX-R 1000 Heads Pro Port $1,320.00 Street Port $ 625.00 Competition Valve Job & Drop Valve Guides $ 375.00 Competition Valve Job $ 375.00 Surface $ Surface $ 60.00 $1,755.00 60.00 $1,060.00 SF-1020 Flowbench Optional Parts & Service • • • • • • • Weld Emission Ports Bore Lifter Buckets Valve Springs Valve Seals Stainless Steel Oversize Valves Camshafts Adjustable Cam Sprockets...

RCC Turbos - Stage 1 Turbo Install - Suzuki Hayabusa - Gen 1

RCC Turbos - Stage 1 Turbo Install: Suzuki Hayabusa (Gen 1) • Preparation/Disassembly: Remove the seat. Disconnect negative terminal on the battery. Drain the fuel tank. Remove the fuel tank. Remove the stock fuel pump from the tank. Remove the air box. Remove the MAP sensor and temperature sensor from the air box. Remove left and right side fairings. Drain engine oil. Drain engine coolant. Remove the oil filter Remove the oil restrictor, behind the filter. Remove the oil cooler lines. Remove the radiator and oil cooler, as one unit, leaving only the bracket/support for radiator (before reinstalling the radiator please remove all the tabs along the bottom of the radiator). Remove the entire exhaust system. Remove the PAIR system. Remove the oil pan from the engine. • Sensor Bracket Modification: On the left hand side of bike, on the inside of the frame, you will see a bracket, with a plastic vacuum canister, vacuum control solenoid valve, atmospheric pressure sensor, and some vacuum lines, with a check valve in the vacuum line. Please remove this entire bracket, eliminate all the vacuum lines, the plastic canister, and the control solenoid valve, and also cut off the metal tab that held the vacuum canister. Then reinstall this bracket with only the atmospheric pressure sensor, and plug the wires back in. • Tap/plug PAIR System Holes: Tap the four small PAIR system holes, above the exhaust ports, with an M6 x 1.0 tap. Install the four small M6 screws into the exhaust holes after tapping them. • Modify the Oil Pan: Drill a ¾” hole on the left side of the oil pan. Use thread sealant on the washer, and red Loctite on the threads. Make sure the sealing washer is against the inside of pan, then the stainless flat washer, then the nut. Once the fitting is installed, reinstall the oil pan. • Install Header/Turbo/Oil Lines/Exhaust: Install the header and turbo as a unit, but with the bolts loose. Use four of your original header bolts on the top of the turbo header (Allen head). Use the four new bolts on the bottom row of the header (M8, 10mm flange head). PLEASE NOTE! After installing the dump pipes and waste gate, the nipple on the top of the waste gate remains open, and no hose gets installed on the top fitting. The top fitting is used for boost control on Stage 2 and higher end kits. It is not used on Stage 1 kits.

SAMPLE RESUME FORMAT Although the Federal Government ...

SAMPLE RESUME FORMAT Although the Federal Government does not require a standard application form for most jobs, we do need certain information to evaluate your qualifications and determine if you meet legal requirements for Federal employment. If your resume or application does not provide all the information requested in the job vacancy announcement you may lose consideration for a job. WHAT TO INCLUDE Job Information  Announcement number, title and grade of the job you are applying for Personal Information Full name, mailing address (with Zip Code) Day and Evening phone numbers Email Country of Citizenship Veterans’ Preference Reinstatement eligibility (Proof of your career or career conditional status may be requested) Highest Federal civilian grade held (provide job series and dates held) Desired Location(s) Work Experience Provide information for your paid and nonpaid work experience related to the job you are applying for.  Job Title (include series and grade if Federal job)  Job Address  Duties and accomplishments  Employer’s name and address  Starting and ending dates (month and year)  Hours per week  Salary   Supervisor’s name and phone number Indicate if we may contact your current supervisor. Education  High School o Name, City, and State o Date of diploma or GED  Colleges or Universities o Majors o  Name, City, and State o Type and year of any degrees received o If no degree, show total credits earned and indicate whether semester or quarter hours.) A copy of your college transcript may be requested if you are using education to meet qualification requirements. An official transcript will be required prior to your appointment if selected.

Savage Gulf Trail Map - Friends of South Cumberland State ...

GREETER TRAIL General Description: This short trail connects the Alum Gap Camp Area with the Greeter Falls Area. The first mile is an easy plateau top walk with the last half mile a moderate gorge walk. The falls are sometimes dry but there is always a cool water hole at the bottom. Miles Trail Description: 0.0 Trail begins at Alum Gap, 1 mile down Big Creek Gulf Trail from camping area. Big Bluff Overlook to left. 0.2 1.0 Suspension Bridge across Boardtree Creek, junction of Greeter Falls Loop Trail. 1.3 Trail splits—left is Lower Falls (50’ high) and plunge pool; right is Upper Falls (15’ high) Greeter Falls. 1.4 General Description: This long, difficult trail is designed to accommodate extended trips. Half the length is the Collins River Gorge and the other half is along the east rim. The gorge section has many beautiful geological features. Trail is closed during part of winter due to dangerous ice buildup at 6.3. Miles Trail Description: Trail begins atop Peak Mountain at the end of the South Rim Trail and the Stage 0.0 Road Historic Trail. 0.5 Blue Branch Overlook to the right, an outstanding view of a short tributary gorge and the main gulf. Ford of Blue Branch; thick Rhododendron growth. 1.1 Horsepound Point Overlook to right. 1.8 2.4 Standing Rock Overlook to right. 2.6 Collins River Overlook to right. 3.0 A small stream is forded with the remains of an old moonshine still visible to the left. Another still site to the left on a larger stream. 4.7 4.9 Collins East Camp Area to left. 5.3 Collins River is crossed on a 100’ suspension bridge, above huge boulders. 6.2 Collins West Camp Area on trail straight ahead; main trail to right. Camp area is on the mountaintop and has the best overlook along the trail—Rocky Point. There is also a parking area from 55th AVE off HWY 108, 1/4th mile out access trail from campsite. 6.3 The spectacular triple waterfall of Rocky Mountain Creek, a huge overhang, and creek ford. A large mound of fallen rocks and exceptionally large Chestnut Oak Tree to trail 6.8 right; start of descent.....

Pigeon Forge, Tennessee Friends oF greaT smoky mounTains ...

MAP DIRECTORY Attractions WonderWorks......................................4 Mountain Valley Winery..................11 Hollywood Wax Museum............ 24 Castle Of Chaos............................... 25 Hannah’s Maze Of Mirrors........... 26 Zorb.........................................................27 Pigeon Forge Bowling Center.. 36 Magiquest............................................48 Rafting In The Smokies................ 58 Firehouse Golf................................... 67 The Forge Cinemas........................68 The Track...............................................71 Dollywood’s Splash Country....123 Dollywood..........................................124 Fantasy Golf......................................125 Old Mill.................................................137 Nantahala Outdoor Center........141 Adventures Of Pigeon Forge...142 Great Smoky Mountains National Park is the most treasures. Money raised by the Friends organization visited national park in the United States, with nearly is put to numerous uses, including the repair and 10 million visitors each year. Unfortunately, decades restoration of wayside exhibits, trail rehabilitation, of heavy use have left their mark on the park. shelter repair and support of the Twin Creeks But today, by joining the Friends of Great Smoky Resource Center. Friends of Great Smoky Mountains Mountains National Park, you can help with the National Park raises funds through membership sales. maintenance and the restoration of one of America’s For more information visit friendsofthesmokies.org. LEGEND n Ranger Station n Picnic Area n Historic Structure n Campground n Lookout Tower A NOTE ABOUT THE BEARS: If a bear approaches your car, keep your windows closed and take pictures from inside. Please do not feed the bears! It confuses their natural habits and violates park regulations. Entertainment Smoky Mountain Opry.................... 2 Wonders Of Magic.............................3 Hatfield & McCoy Dinner Show..5 Blackwood Morning Variety Show.........................................................6 Country Tonite Theatre................ 23 Lumberjack Feud............................ 76 Great Smoky Mountain Murder Mystery Dinner Show.................... 78 The Comedy Barn Theater.........80 Dolly Parton’s Dixie Stampede Dinner Attraction............................169 Accommodations Hotels & Motels Mountain Melodies Inn....................8 Hampton Inn & Suites.....................12 Microtel Inn & Suites........................13 Hotel Pigeon Forge Inn & Suites... 16 Ramada Pigeon Forge North.....17 Motel 6................................................... 19 Music Road Inn.................................20 Music Road Hotel..............................21 Spirit Of The Smokies Condo Lodge.................................................... 28...

Find Coziness In Your Stay In Hawaii, Select Hawaii Vacation Rental Homes

Hawaii is the ideal summer holiday destination in the U.S. It's a place filled with excitement and fun where individuals can bask under the sun. You will definitely be able to have a good time along with your family members in this place. You will be able to encounter numerous fresh faces here as well. Hawaii is also regarded as among the best locations for honeymoon since there are a great number of newlyweds who come here year after year. This is a good location for individuals who wish to enjoy a summer away from the busy city life. Nonetheless, you need to find a great spot to stay first like hotels and Hawaii vacation rental homes.

« previous  123456789