SEARCH

Found 3056 related files. Current in page 1

2006 chevy 2500hd wiring diagram

VW Amarok - Body Harness.pdf - Hayman Reese

For P/No: 04998 & 04999 only. 1. In the engine bay, disconnect the negative and positive battery terminals. 2. Remove the vehicle battery (1) by first removing any fasteners. 3. Locate the vehicle grommet behind the battery cavity area. 4. Pierce a hole in the vehicle grommet. Note: Do not connect the harness to the battery at this point. Issue Date 27-09-10 For P/No: 04997 only. 5. In the engine bay, locate the vehicle battery (1). 6. Route the body harness (2) down through to the chassis. Note: Do not connect the harness to the battery at this point. 7. Route the power input harness (1) from the engine bay down through to the chassis, following the path of the brake and fuel lines. For P/No: 04997 & 04999 only. 8. Following the diagram on the right, house the two power & ground input harness female terminals (4) into the mating connector (3). 9. Connect the power input harness connector (3) to the body harness mating connector. Issue Date 27-09-10 For P/No: 04998 only. 10. Following the diagram on the right, house the three power & ground input harness female terminals (4) into the mating connector (5). 11. Connect the power input harness connector (5) to the body harness mating connector. 12. Route the body harness (1) along the LHS chassis rail, following the path of the blue vehicle harness towards the rear of the vehicle. 13. Route the body harness (1) along the rear of the vehicle towbar towards the towbar mounting bracket. Issue Date 27-09-10

Trolley Jacks - Supplier Guide - ACCC

Australian Competition and Consumer Commission 23 Marcus Clarke Street, Canberra, Australian Capital Territory, 2601 © Commonwealth of Australia 2013 This work is copyright. In addition to any use permitted under the Copyright Act 1968, all material contained within this work is provided under a Creative Commons Attribution 3.0 Australia licence, with the exception of: • the Commonwealth Coat of Arms • the ACCC and AER logos • any illustration, diagram, photograph or graphic over which the Australian Competition and Consumer Commission does not hold copyright, but which may be part of or contained within this publication. The details of the relevant license conditions are available on the Creative Commons website, as is the full legal code for the CC BY 3.0 AU licence. Requests and inquiries concerning reproduction and rights should be addressed to the Director, Internal Communication and Publishing Services, ACCC, GPO Box 3131, Canberra ACT 2601, or publishing.unit@accc.gov.au. Important notice The information in this publication is for general guidance only. It does not constitute legal or other professional advice, and should not be relied on as a statement of the law in any jurisdiction. Because it is intended only as a general guide, it may contain generalisations.

Gateway Lite BT install guide - Dension

Gateway Lite BT enables music playback from a USB storage or iPod through your vehicle’s entertainment system, using the buttons of the car stereo for basic control. Once the head unit has been removed, disconnect the antenna cable (1) and then unclip the main wiring connector from the head unit (2). This will differ in all makes and manufacturers. This device also offers handsfree mobile call handling via the original buttons of the Head Unit (Radio). Connect the 12 way micro-fit (12 pin molex) to the Car side of the Gateway Lite BT module. The Dension Gateway Lite BT is available in specific versions for different vehicle types, therefore the exact operation and installation may be different in each case. Warning! Do not trap the cables, or leave them in a position where they may become trapped after refitting the head unit. Ensure the device is correctly fitted before running the cable. Then, reconnect the Dension supplied main radio connector to the rear of the head unit. Gateway Lite BT is designed to give easy to manage control, in cars where it is not possible to display text, therefore only basic control is available (track skip functions and USB folder browsing). At first please make sure that the vehicle compatibility is correct. Connect the round iPod connector and USB to the module and feed them through the dashboard to an appropriate location. With the main radio cable removed, first connect the Dension supplied cable to the original factory cable harness.

Accessory drive on Renault 1.5 DCi engines - Gates Corporation

Certain Renault 1.5 DCi models, produced between June 2001 and June 2002, without air-conditioning, could have issues with the accessory drive belt, as a result of tensioner problems. The tensioner base plate could deform, resulting in misalignment, belt noise and early failure. In order to cure this, Renault launched a technical note, saying the old tensioner (OE ref. 8200262773, 8200292784), the 2 tensioner bolts (torxhead) and the accessory drive belt (OE ref. 8200020924) have to be replaced. Vehicles involved: *Clio II, Symbol, Van 1.5DCi. Chassis codes: BB07, BB08, CB07, CB08, LB07, SB07, SB08; with engine K9K700 or K9K702. *Kangoo, Rapid, Express 1.5DCI. Chassis codes: FC07, FC08, KC07, KC09 ; with engine K9K700, K9K702 or K9K710. How to proceed: Loosen tensioner bolts Remove old accessory drive belt Remove old tensioner bolts and tensioner Install new tensioner (OE ref. 8200328372) Use 2 new bolts (OE ref. 7703002059 - hex head) Install the 2 bolts hand tight Install a new Micro-V® XF belt 5PK1133 (OE ref. 8200020924). ATTENTION!!! The pulleys of this drive have 6 grooves, while the needed belt only has 5 ribs. The groove closest to the engine bloc has to remain free. Tensioning the new belt: The belt has to be tensioned (with tool Mot. 1638, OE ref. 0000163800) to a higher tension than with the original drive set-up Technical Bulletin 013 Copyright © 2006 Gates Corporation

展示名:欧州航空大混乱!-アイスランド火山噴火- 展示本リスト

展示名:欧州航空大混乱! -アイスランド火山噴火- アイスランドのエイヤフィヤットラヨークトル氷河で4月14日から続いている火山噴火によって、大量の火山灰 が欧州上空を覆った。飛行機は火山灰によってエンジン停止の可能性があるため飛べず、航空網が寸断さ れ、経済活動・政治活動など様々な部分に影響が及んでいる。 展示期間 平成22年4月20日~ 5月6日 展示本リスト 平成22年4月20日現在 【高知県立図書館所蔵】 書 名 著 者 出版社 出版年 請求記号 配架場所 1 局地風のいろいろ 改訂版 荒川 正一 成山堂書店 2001 451.4 一般 2 世界の風・日本の風 吉野 正敏 成山堂書店 2008 451.4 一般 3 風の気象学 竹内 清秀 東京大学出版 会 1997 451.4 一般 4 偏西風の気象学 田中 博 成山堂書店 2007 451.4 一般 5 再生 吉田 正夫 古今書院 2002 453.8 一般 6 火山のはなし 災害軽減に向けて 下鶴 大輔 朝倉書店 2000 453.8 一般 7 火山大災害 金子 史朗 古今書院 2000 453.8 一般 ディック・トンプソン /著 地人書館 山越 幸江/訳 2003 453.8 一般 白尾 元理 地人書館 2002 453.8 一般 サイモン・ウィン チェスター/著 柴田 裕之/訳 早川書房 2004 453.8 一般 11 史上最強カラー図解 鈴木真二/監修 ナツメ社 2009 538 ジョブ 12 わかりやすい航空工学入門 橋本 孝明 晃洋書房 2004 538.1 ジョブ 新星出版社 2006 538.6 ジョブ 自然力を知る ピナツボ火山災害地域の環境 8 火山に魅せられた男たち 噴火予知に命がけで挑む科学者の物語 火山とクレーターを旅する 地球ウォッチング 9 紀行 クラカトアの大噴火 世界の歴史を動かした火 10 山 プロが教える飛行機のすべてがわかる本 飛行機のしくみ 最新の機体の構造から操縦 新星出版社編集 部/編 13 システムのしくみまで 14 大空への挑戦 ジェット機編 鳥養 鶴雄 グランプリ出版 2002 538.6 ジョブ 15 飛行機の百科事典

Steering, Suspension, and Driveline Basics (with How Lift ... - Meetup

Throughout this article I will address many basics of your vehicle’s steering, suspension, driveline, tires, and wheels. I did not intend this to be a “how to” manual with step by step instructions. It will simply illustrate the concepts. I’ll start with the lift and explain what it did to your steering, suspension, and driveline one aspect at a time. NOTES ABOUT THE ILLUSTRATIONS: 1) most are “spring under” leaf spring suspension, 2) non-pertinent parts are omitted for clarity, 3) many examples are exaggerated for illustration, and 4) most concepts illustrated also apply to spring over and coil/link suspensions. To cover the differences, I added a separate coil and link suspensions topic. Ready? OK, let’s get started. You lifted your Jeep and now it wanders all over the road and it vibrates too. What happened? Well, you just changed a lot of the vehicle’s geometry (probably without knowing it). Here’s a diagram of a stock Jeep and the proper angles. Your caster angle should be between 4 and 8 degrees positive. This caster angle creates an effect called mechanical trail. It’s the force that makes your wheels return to center. The caster angle shown below is close to stock. The point that the steering axis (black line) intersects the ground to the point to where the rotational axis touches the ground forms the points to measure your caster angle. You can best measure the caster angle from the top of the upper ball joint.

1 TON FOLDING ENGINE STAND - Harbor Freight Tools

1 TON FOLDING ENGINE STAND Model 47304 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2002 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools . For technical questions and replacement parts, please call 1-800-444-3353 Specifications Engine Stand Capacity Assembled Dimensions Folded Dimensions Engine Turn Capacity Main Post Height 1 Ton (2000 Lbs.) 42” L x 36” W x 34” H 17” L x 22-1/2” W x 40” H 360 Degrees 32-1/2” Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Avoid working alone. If an accident happens, an assistant can bring help. 2. Keep work area clean. Cluttered areas invite injuries. 3. Observe work area conditions. Don’t expose to rain. Keep work area well lighted. 4. Keep children away. Children must never be allowed in the work area. Do not let them near the Stand. 5. Store idle equipment. When not in use, the Stand must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. 8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames. 9. Maintain Stand with care. Inspect Stand, and if damaged, have it repaired by an authorized technician. SKU 47304

3.0 L V6 - VINS [H,J,K] - dairally.net

Removal (Diamante) 1) Remove hood. Drain cooling system. Remove radiator. Release fuel system pressure. See FUEL PRESSURE RELEASE. Disconnect negative battery cable. Drain engine oil and transaxle oil. Remove front exhaust pipe. Remove transaxle assembly. See appropriate CLUTCHES or TRANSMISSION SERVICING article. 2) Disconnect accelerator cable, brake booster vacuum hose, fuel supply and return lines, and heater hoses. Disconnect EGR temperature sensor (if equipped). Unplug vacuum hose connector. Remove drive belts. Remove power steering pump and A/C compressor, leaving hoses attached. 3) Unplug all harness connectors. Remove bolt from body ground connection. Disconnect alternator wiring inside relay box. Remove relay box and engine wiring harness connection. On models with ABS, remove radiator overflow tank and bracket. 4) Attach engine hoist. Raise engine enough to take weight from mounts. Remove engine mount bracket. Remove damper. Remove rear roll stopper bracket mount bolt. Remove front roll stopper bracket mount bolt. Carefully lift engine from car. Installation (Diamante) To install, reverse removal procedure. Install engine mount bracket so that arrow points away from engine, toward body. Install new "O" rings on fuel lines. Install new exhaust gaskets and nuts. Adjust throttle cable. See TORQUE SPECIFICATIONS TABLE at the end of this article. Replenish fluids. CAUTION: DO NOT allow foreign material into turbocharger air intake hoses or pipes.

Printable (PDF) version - Innovate Motorsports

www.tuneyourengine.com. 1994 - 1997 Mitsubishi 3000GT VR4 ECU Diagram. Connector A. Connector B Connector C. Connector D. Pin #. Name. Signal Type. Connector B Name Injector 1 Injector 3 Injector 5 Injector 2 Injector 4 Injector 6 Power Ground Air Intake Temperature Sensor O2 Sensor # 1 (Right Bank) O2 Sensor # 2 (Left Bank) Engine Coolant Temperature Sensor Throttle Position Sensor Atmospheric Pressure Sensor Vehicle Speed Sensor Volume Air Flow Sensor Power Ground Sensor Ground Connector C Connector D Signal Type Speed Speed Speed Speed Speed Speed Ground Analog Analog Analog Analog Analog Analog Speed Analog Ground GroundConnector B Name Injector 1 Injector 3 Injector 5 Injector 2 Injector 4 Injector 6 Power Ground Air Intake Temperature Sensor O2 Sensor # 1 (Right Bank) O2 Sensor # 2 (Left Bank) Engine Coolant Temperature Sensor Throttle Position Sensor Atmospheric Pressure Sensor Vehicle Speed Sensor Volume Air Flow Sensor Power Ground Sensor Ground Connector C Connector D Signal Type Speed Speed Speed Speed Speed Speed Ground Analog Analog Analog Analog Analog Analog Speed Analog Ground GroundConnector B Name Injector 1 Injector 3 Injector 5 Injector 2 Injector 4 Injector 6 Power Ground Air Intake Temperature Sensor O2 Sensor # 1 (Right Bank) O2 Sensor # 2 (Left Bank) Engine Coolant Temperature Sensor Throttle Position Sensor Atmospheric Pressure Sensor Vehicle Speed Sensor Volume Air Flow Sensor Power Ground Sensor Ground Connector C Connector D Signal Type Speed Speed Speed Speed Speed Speed Ground Analog Analog Analog Analog Analog Analog Speed Analog Ground Ground

Rhode Island College Anchor Notes - Rhode Island College Athletics

The annual Fall Homecoming continues to be very successful, so successful that many people wished it happened a number of times throughout the year. Additionally, over the past few years during the winter season, RIC has hosted reunions for basketball, gymnastics and wrestling alumni. The athletic department is pleased to announce that on the weekend of February 3, we will be combining many winter activities and more as the College plays host to its first Winterfest. It will be a weekend full of activities directed at students, alumni, parents and anyone else who is part of the College family. There will be sporting events, skating at the Bank of America Center, sleigh rides, an outdoor hot dog roast and much more! For more information on the 2007 Winterfest, check future editions of What’s News as well as the College website. Athletics Hits the Road! The athletic program, in cooperation with the Alumni Association, will be on the road in Florida from Jan. 30 - Feb. 2. There will be an event hosted by Wileen Coyne ’55 in Boca Raton on Jan. 31 and another event hosted by Ennis Bisbano ’55 at the Charlotte Harbor Yacht Club on Feb. 1. Additionally, if anyone cannot attend one of those events, but is interested in meeting with athletic or developmental staff, feel free to contact us at (401) 456-8007. For further details about “RIC on the Road”, visit the College website or contact the alumni office. RIC will also be on the road in Florida the week of Mar. 12 in the Orlando and Tampa area as our outstanding softball and baseball teams travel to the Sunshine State for Spring Training. RIC Celebrates 30 Years of Women’s Athletics 2006-07 marks the 30th anniversary of the beginning of women’s varsity intercollegiate athletics at Rhode Island College. 1976-77 was the first year women’s teams began participating in organized varsity athletics and the College will celebrate this milestone with a gala event this spring. This event will honor pioneers, teams and individual achievements of female student-athletes and coaches over the past three decades. If you have a nomination idea, please contact Art Pontarelli ’71 via telephone at: (401) 456-8863, or by e-mail: apontarelli@ric.edu.

« previous  123456789