Found 3244 related files. Current in page 1
Important notice: GFT and Coast Investment Software, Inc. are separate and independent companies. GFT makes the DiNapoli Level Studies™ available to its customers as an additional service within its DealBook® FX 2 software program. However, GFT is not responsible for the DiNapoli Level trading strategies, for which Coast Investment Software, Inc. is solely responsible. Nor is GFT responsible for any representations made through the methods of analysis of Coast Investment Software, Inc., including any past performance information. Forex trading presents substantial risk of loss with or without the use of DiNapoli Level Studies™. Past results are not necessarily indicative of future results. The information contained herein is subject to change without notice and was obtained from sources believed to be reliable, but is not guaranteed as to accuracy or completeness. Those using the materials for trading purposes are responsible for their own actions. No guarantee is made that trading signals or methods of analysis will be profitable or will not result in losses. It should not be assumed that performance will equal or exceed past results. Trademarks and Copyrights. FibNodes, DiNapoli Levels, Oscillator Predictor, DiNapoli MACD Predictor and D-Levels are trademarks of Coast Investment Software Inc. All contents of this website are Copyrighted © 1998-2004, Coast Investment Software Inc. All Rights reserved worldwide.
A Guide to Joe DiNapoli’s D-Levels™ Studies Using GFT’s DealBook FX® 2 Based on the book: Trading with DiNapoli Levels The Practical Application of Fibonacci Analysis to Investment Markets Important notice: GFT and Coast Investment Software, Inc. are separate and independent companies. GFT makes the DiNapoli Level Studies™ available to its customers as an additional service within its DealBook® FX 2 software program. However, GFT is not responsible for the DiNapoli Level trading strategies, for which Coast Investment Software, Inc. is solely responsible. Nor is GFT responsible for any representations made through the methods of analysis of Coast Investment Software, Inc., including any past performance information. Forex trading presents substantial risk of loss with or without the use of DiNapoli Level Studies™. Past results are not necessarily indicative of future results. The information contained herein is subject to change without notice and was obtained from sources believed to be reliable, but is not guaranteed as to accuracy or completeness. Those using the materials for trading purposes are responsible for their own actions. No guarantee is made that trading signals or methods of analysis will be profitable or will not result in losses. It should not be assumed that performance will equal or exceed past results. Trademarks and Copyrights. FibNodes, DiNapoli Levels, Oscillator Predictor, DiNapoli MACD Predictor and D-Levels are trademarks of Coast Investment Software Inc. All contents of this website are Copyrighted © 1998-2004, Coast Investment Software Inc. All Rights reserved worldwide.
To Riggins Hill and Fort Defiance “Battle of Shiloh” Courtesy Library of Congress CLARKSVILLE MURFREESBORO S N. Scroll flask and .36 caliber Navy Colt bullet mold found at Camp Trousdale site in Sumner County. Courtesy Pat Meguiar . ST ING PR 41 Stones River National Battlefield and Cemetery Oaklands Mansion 41 T. EGE S COLL Recapture of Clarksville KNOXVILLE 441 Evergreen Cemetery 231 40 Clarksville in the Civil War Surrender of Clarksville 275 CE S MER COM Rutherford County Courthouse T. 41 96 Old Gray Cemetery Mabry-Hazen House 40 231 Bleak House 24 68 Crew repairing railroad track near Murfreesboro after Battle of Stones River, 1863 – Courtesy Library of Congress 68 231 79 ALT 70 M I SSISS 104 Tennessee City (Camp Gillem/ Irish Shanty) New Johnsonville Clarksburg Fighting on the Tennessee River (Birdsong Marina) 70 Parker’s Crossroads (Multiple Sites) 48 McNairy’s Attack Dickson (Clement RR 96 Museum) 40 100 40 Centerville (Hickman Co. Courthouse) 87 412 19 Salem Cemetery Battlefield 61 Brownsville 59 Casey Jones Village 223 Covington Denmark (Presbyterian Church) Forts Randolph and Wright 178 13 100 Henderson 138 51 Doe Creek School 18 128 64 64 64 40 Collierville (Battle of Collierville and Chalmers’s Raid) LaGrange Battle of Moscow Grand Junction 57 Shiloh NMP Fallen Timbers Johnston’s Last Bivouac Davis Bridge Battlefield State Park Savannah (Cherry Mansion and Tennessee River Museum) Lawrenceburg Collinwood ALT 41 55 Five Points Lairdland Farm House Colt revolving rifle, used Nov. 3, 1863, by 2nd Iowa Cav. at Collierville, Shelby Co. Courtesy Norm Flayderman 240 64 Elkton Bridge Harlinsdale Farm Confederate Park 231 Sherman’s Crossing Suck Creek Lotz House FRANKLIN 280 Robbinsville (Civil War in Graham County) 19 Allison-Deaver House Franklin (Dixie Hall) Thomas’s Legion Macon Co. Historical Museum Cashiers (Zachary-Tolbert House) 19 CHATTANOOGA To Suck Creek E ANE CARNTON L Union Lt. Charles R. Ellet approaches Memphis to demand surrender, Harper’s Weekly, June 28, 1862 H R EW IS L To Winstead Hill Bleak House, Knoxville, circa 1874 Courtesy Knoxville Chapter 89, United Daughters of the Confederacy 129 R I V P E 31 Tellico Plains Waynesville (Multiple Sites) “Execution of Jacob Harmon and His Son Henry, Unionist bridge-burners,” from Parson Brownlow’s Book (1862) BU RG IV AV E E Kurz and Allison, “Battle of Franklin” Courtesy Williamson County Historical Society R Confederate Eastern Flank Carnton Plantation Confederate Cemetery National Landmark Occupied Chattanooga Ross’s Landing EESB ORO R D. Collins Farm McGavock’s Grove 64 Old Fort (Swannanoa Gap) 221 74 Coker Creek 40 76 Steamboats tied up at Ross’s Landing in Chattanooga, with Cameron Hill looming in the background Courtesy Library of Congress R Carson House 70 75 R URF R Vance Birthplace 70 28 Madisonville (Monroe County Courthouse) Niota Depot 27 T 55 Marshall (Col. Allen House) 321 Capt. Edwin Rocky Ford Engagement Mars Hill College 411 51 78 Hot Springs 25 (Warm Springs Hotel) Maggie Valley (Kirk’s Raid) Cleveland (Museum Center) (See Inset) Chattanooga Creek 19E (Multiple Sites)
nationalatlas.gov Where We Are TENNESSEE TM OHIO POPULATED PLACES INDIANA Memphis 500,000 – 999,999 Chattanooga 100,000 – 499,999 25,000 – 99,999 24,999 and less ILLINOIS Kingsport WEST VIRGINIA Shelbyville Nashville TRANSPORTATION KENTUCKY River Mi ss AR iss ip p i The lowest elevation in Tennessee is 178 feet above sea level (Mississippi River). 155 Martin Dyersburg Brownsville Millington Memphis Germantown Paris Cu Kentucky Lake m be Jackson Nashville MILES 25 50 75 Hendersonville Smyrna Murfreesboro D uc Franklin k Lexington Columbia Linden Shelbyville Bolivar Selmer Savannah Lawrenceburg Pulaski 65 nne Tullahoma 24 D Center Hill Lake R Fayetteville Pickwick Lake Livingston McMinnville E 75 Oneida Cookeville Lebanon Dickson Te 0 Portland Gallatin 24 rla n d Waverly Milan 40 Clarksville P Dale Hollow Lake B Union City 6643 Highest elevation in state (feet) Lake Barkley M PHYSICAL FEATURES Streams Lakes er Railroad MISSOURI Riv Other principal highway R L A Chattanooga L A Knoxville Maryville Gatlinburg 75 Clingmans Dome 6643 Athens T Cleveland T E A U VIRGINIA Bristol Kingsport Norris R 81 Lake n Morristown o l st Ho Greeneville NOak Ridge U 40 C Interstate; limited access highway Ri v er State capital E GR SM Newport OK Y MT Johnson City S NORTH CAROLINA A SOUTH CAROLINA ss e e 100 Albers equal area projection ALABAMA MISSISSIPPI U.S. Department of the Interior U.S. Geological Survey GEORGIA The National Atlas of the United States of AmericaO R pagegen_tn3.pdf INTERIOR-GEOLOGICAL SURVEY, RESTON, VIRGINIA-2004
SNMPTN 2012 Matematika Doc. Name: SNMPTN2012MATDAS999 Version : 2013-04 halaman 1 01. Jika a dan b adalah bilangan bulat positif yang memenuhi ab = 220 - 219, maka nilai a+b adalah …. (A) 3 (B) 7 (C) 19 (D) 21 (E) 23 02. Jika 4log3 = k , maka 2log27 adalah … (A) k 6 (B) (C) (D) (E) k 6k 6 k6 k 03. Jika p+1 dan p-1 adalah akar-akar persamaan x2 - 4x + a = 0, maka nilai a adalah …. (A) 0 (B) 1 (C) 2 (D) 3 (E) 4 04. Jika f adalah fungsi kuadrat yang grafiknya melalui titik (1,0), (4,0), dan (0,-4), maka nilai f(7) adalah …. (A) -16 (B) -17 (C) -18 (D) -19 (E) -20 Kunci dan pembahasan soal ini bisa dilihat di www.zenius.net dengan memasukkan kode 2429 ke menu search. Copyright © 2012 Zenius Education SNMPTN 2012 Matematika, Kode Soal doc. Name: SNMPTN2011MATDAS999 version : 2013-04 | halaman 2 05. Semua nilai x yang memenuhi (x + 3)(x - 1) ≥ (x - 1) adalah (A) 1 ≤ x ≤ 3 (B) x ≤ -2 atau x ≥ 1 (C) -3 ≤ x ≤ -1 (D) -2 ≥ x atau x ≥ 3 (E) -1 ≥ x atau x ≥ 3 06. Jika 2x - z = 2, x + 2y = 4, dan y + z = 1, maka nilai 3x + 4y + z adalah …. (A) 4 (B) 5 (C) 6 (D) 7 (E) 8 07. Jika diagram batang di bawah ini memperlihatkan frekuensi kumulatif hasil tes matematika siswa kelas XII, maka persentase siswa yang memperoleh nilai 8 adalah…. (A) (B) (C) (D) (E) 12 % 15 % 20 % 22 % 80 % Kunci dan pembahasan soal ini bisa dilihat di www.zenius.net dengan memasukkan kode 2429 ke menu search. Copyright © 2012 Zenius Education SNMPTN 2012 Matematika, Kode Soal doc. Name: SNMPTN2011MATDAS999 version : 2013-04 | halaman 3 08. Ani telah mengikuti tes matematika sebanyak n kali. Pada tes berikutnya ai memperoleh nilai 83 sehingga nilai rata-rata Ani aalah 80, tetapi jika nilai tes tersebut adalah 67, maka rata-ratanya adalah 76. Nilai n adalah …. (A) 2 (B) 3 (C) 4 (D) 5 (E) 6 09. Nilai maksimum fungsi objektif (tujuan) f(x,y) = 3x + 2y dengan kendala x + 2y ≤ 12, x ≥ 2, dan y ≥ 1 adalah …. (A) 16 (B) 18 (C) 32 (D) 36 (E) 38 10. Jika dan , maka determinan matriks AB - C adalah …. (A) -5 (B) -4 (C) 5 (D) 6 (E) 7 11. Agar tiga bilangan a + 2, a - 3, a - 4 merupakan barisan aritmatika, maka suku ke dua harus ditambah dengan …. (A) -3 (B) -2 (C) -1 (D) 1 (E) 2 Kunci dan pembahasan soal ini bisa dilihat di www.zenius.net dengan memasukkan kode 2429 ke menu search. Copyright © 2012 Zenius Education SNMPTN 2012 Matematika, Kode Soal doc. Name: SNMPTN2011MATDAS999 version : 2013-04 | halaman 4 12. Jika suku pertama barisan aritmatika adalah -2 dengan beda 3, Sn adalah jumlah n suku pertama deret aritmatika tersebut, dan Sn+2 - Sn = 65, maka nilai n adalah …. (A) 11 (B) 12 (C) 13 (D) 14 (E) 15 13. Jika suatu persegi dengan sisi satu satuan dibagi menjadi 5 persegi panjang dengan luas yang sama seperti ditunjukkan pada gambar di bawah ini, maka panjang ruas garis AB adalah … (A) 3 5 (B) 2 3 (C) 2 5 (D) (E) 1 5 1 5 14. Di suatu kandang tedapat 40 ekor ayam, 15 ekor diantaranya jantan. Di antara ayam jantan tersebut, 7 ekor berwarna putih. Jika banyak ayam berwarna putih adalah 22 ekor, maka banyak ayam betina yang tidak berwarna putih adalah … (A) 5 (B) 7 (C) 8 (D) 10 (E) 15 Kunci dan pembahasan soal ini bisa dilihat di www.zenius.net dengan memasukkan kode 2429 ke menu search. Copyright © 2012 Zenius Education SNMPTN 2012 Matematika, Kode Soal doc. Name: SNMPTN2011MATDAS999 version : 2013-04 | halaman 5 15. Jika f(x) = ax + 3, a ≠ 0 dan f-1 (f-1(9)) = 3, maka nilai a2 + a + 1 adalah … (A) 11 (B) 9 (C) 7 (D) 5 (E) 3 Kunci dan pembahasan soal ini bisa dilihat di www.zenius.net dengan memasukkan kode 2429 ke menu search. Copyright © 2012 Zenius Education
1340cm3 in-line 4-cylinder fuel-injected, liquid-cooled DOHC engine built to deliver a broad wave of torque for effortless acceleration. Suzuki Clutch Assist System (SCAS) serves as back-torque-limiting system for smooth downshifts and also contributes to a light clutch pull. U-shaped cutouts in the cylinder-bore sides allow air below descending pistons to escape to adjacent cylinders to reduce internal pumping pressure and mechanical power losses. Advanced aerodynamics offering superb wind protection both for normal and completely tucked-in seating positions. Lightweight titanium valves allow use of light valve springs and high lift while maintaining accurate valve control. Iridium spark plugs produce more complete combustion. Curved radiator with a compact, dense-core design and engine-management-computer-controlled two ring-type electric fans mounted on the rear of the radiator, increasing the control accuracy and keeping engine temperature stable. Suzuki Dual Throttle Valve (SDTV) fuel injection results in improved power delivery and a more linear response. This system uses engine-computer-operated secondary valves to maintain optimum intake-air velocity for maximum combustion efﬁciency. Two 12-hole ﬁne-spray injectors on each throttle body improve fuel atomization for better combustion efﬁciency and while reducing fuel consumption. Suzuki Drive Mode Selector (S-DMS) enables the rider to choose from three different engine power characteristics according to personal preference. Speciﬁcations, appearance, colors (including body color), equipment, materials and other aspects of the “SUZUKI” products shown in this catalogue are subject to change by Suzuki at any time without notice, and they may vary depending on local conditions or requirements. Some models are not available in some regions. Each model may be discontinued without notice. Please inquire at your local dealer for details of any such changes. Always wear a helmet, eye protection and protective clothing. Enjoy riding safely. Read your Owner's Manual carefully. Never ride under the inﬂuence of alcohol or other drugs. PRINTED IN JAPAN Hayabusa 1300 (GSX1300R) Leaﬂet 99999-A0021-121 SEP.'11 300 Takatsuka-cho, Minami-ku, Hamamatsu City, JAPAN 432-8611 Electronic ignition (Transistorized) 21.0 L (5.5 US gal) Colors Functional Instrument cluster Inverted cartridge front forks featuring Diamond-Like Coating (DLC) surface treatment to reduce stiction and improve reaction to small surface irregularities. The front forks and the single rear shock absorber both have fully adjustable spring preload, compression and rebound damping. 310mm (12.2-in) dual-ﬂoating-disc front brakes with efﬁcient, race-proven aluminum-piston, radial-mount brake calipers, and 260mm (10.2-in) single-disc rear brake with single-piston brake caliper. Four analog gauges including step-motor-driven tachometer and speedometer. Round LCD panel includes clock, gear position indicator, S-DMS map indicator, odometer and dual trip meters. Engine-rpm indicator, programmable to blink or stay on between 4,000 and 11,500 rpm.
SUZUKI GSX-1300R HAYABUSA K8 COLORED WIRING DIAGRAM ECM UNIT BOTTOM VIEW 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 7 8 6 5 4 3 2 1 VIEW FROM INSERTION FACE OF COUPLER 1 Gr B/W SDS GND W/R Bl/Y R O/W +B COV2 RxD1 TxD1 +5V 8 1 6 1 B/Br Bl/W Bl/B Bl/G P/W W/B SM1A SM2A TECH MPS PM VTA COS2 G B/Y W/G R B/Bl G/B P/B Bl/Y B/G P VCC THW OX N+ G+ BATT SM1B SM2B +B STP Dg G/Y B/W P B G/B Y/W B/Lg G O/W R/Bl GP DON LED EXS PA THA E2 SDS SG COV1 35 34 SDL NCOV3 VM Y/B Y/Bl O/Bl Bl G B/W Y/R Gr Bl Bl/G B/Br IS1A IS2A E1 DMS1 TACO IRLY OXH STA SOL2 FAR #31 #41 #21 IG2 IG3 #11 IG1 Bl/W Bl/B O/R Y Br W/Bl B Y Gr/W Gr/B Gr/Y Gr/R Gr O/R Y/G W/B DMS2 IS1B IS2B COV2 COV1 NT MS #42 CLT #32 G B/W B/W W/R Lg Lg/W Lg/G Lg/Bl B/Y Bl B/W TS #12 #22 E01 IG4 E03 JAE MX23A34SF1 (black) Gr G Gr Y 4 SUMITOMO 090-MT G B/W O/G W/B ON OFF R O G/B O O/G Br O/Bl O/R B/W O/B O/W O/G W/B Y/G O Y/W 5 1 BRAKE LIGHT SWITCH O/W B/Br W/G W/B G/Y R O O/Y Bl Gr Br 1 ON OFF LOCK P B Lg G/Y B/Lg OIL FUEL LEFT RIGHT LIGHT NT DATA +B P B/R Y/Bl B/G O/G Y Bl/B R/Bl B/W SPEED VCC TACO BATT E O/Bl O/R B/W O/B O/W B/R B/Bl Y/G O/R Y/W IGNITION SWITCH 16 B/R B/W B JAE MX34016SF1 B/R B/W P PUSH FREE PUSH Gr B COMBINATION METER SIDE-STAND SWITCH OFF ON Gr W/Bl STARTER BUTTON 68 W Gr B W OFF RUN UP DOWN JAE MX23A34SF2 (gray) 6 2 DIAGNOSIS ECM IGNITION IGNITION IGNITION IGNITION COIL #1 COIL #2 COIL #3 COIL #4 G B/W SPEED SENSOR DRIVING MODE SWITCH FRONT BRAKE SWITCH OFF ON O/W B/Br W/G W/B B 9 3 FLASH HANDLEBAR SWITCH (R) 1 5 FURUKAWA 090-RFW HO2 SENSOR OIL PRESSURE SWITCH 16 6 1 8 7 2 ENGINE STOP SWITCH 8 3 VIEW FROM INSERTION FACE OF COUPLER 4 MODE (For E-03, 28) 17 16 15 14 13 12 11 10 9 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 POSITION LIGHT (R) B B Br B/W FRONT TURN SIGNAL LIGHT (R) B B/W Lg B/W REAR TURN SIGNAL LIGHT (R) W B/W HEADLIGHT (LO) Lg W Y B/W Br B Y B/W HEADLIGHT (HI) FRONT TURN SIGNAL LIGHT (L) B B/W B B/W B B Lg B/W Lg W Y B/W Br B Lg W/B B/W Br B Br B/W Lg B/W REAR COMBINATION LIGHT Lg W/B B/W Br B W/B B/W Br B B/W W/B B/W Br B B/W REAR TURN SIGNAL LIGHT (L) POSITION LIGHT (L) Br B/W Gr B/W 3 PUSH OFF ON L PUSH R PUSH HI LO PAIR FAN MOTOR CONTROL SOLENOID RELAY VALVE ECT SENSOR STVA STP SENSOR GP SWITCH FREE PASSING DIMMER CLUTCH HAZARD HORN SWITCH SWITCH BUTTON SWITCH TURN SIGNAL LIGHT LIGHT SWITCH SWITCH #1 Gr/R Y/R #4 Gr/Y Y/R Lg/G Y/R #3 Gr/B Y/R #2 SECONDARY FUEL INJECTOR Gr/W Y/R #1 Lg/Bl Y/R TP IAP SENSOR SENSOR Lg Y/R HANDLEBAR SWITCH (L) #2 #3 #4 PRIMARY FUEL INJECTOR ISC VALVE Y Y Y REGULATOR/ RECTIFIER GENERATOR Bl Y G Br B/W B/W B/Y Y/G R R Y Y Y R R B/W B/W B B B B/R B/R B/W B/W Y Y Y G Bl Bl G 1 Bl P B/W TO SENSOR R B/Y B/Br Bl P B/W Bl/Y R B R B B/Br B/Lg P/W G W/B R Y/W B/Br B P G W/Bl Bl Y B
A reasonably competent amateur mechanic, using only basic hand tools, should be capable of fitting the Geartronics indicator in less than 1 hour. Step 1. Remove the screw at each side of the seat and remove the riders seat. Remove the 2 screws in front of the fuel tank. Lift the front of the tank and support at approximately 45° to gain access behind the engine. Step 2. Remove all screws securing the left hand lower fairing and carefully remove the panel to expose the bike frame. Note that there are 2 different sizes of screws! Remove the single screw & clip securing the insert panel located to the left of the instrument cluster. The centre of the clip should be pushed in, allowing the outer part to be pulled out. Step 3. Locate the gear position sensor connectors with reference to the photo below. Close up of gear position sensor connector The connectors are 3 pin white triangular, and have pink blue & black wires. Separate the 2 connectors by inserting a small screwdriver into the releasing latch and pulling the housings apart. DO NOT pull on the wires to separate the connectors as damage may result. Step 4. Plug the connectors on the Geartronics loom into the two connectors you separated in step 3. Run the Geartronics loom alongside the existing loom on the left hand side frame. Secure with the cable ties supplied in the kit. Step 5. The Geartronics control box should be fitted behind the fuse box located under, and in front of, the left handlebar. The control box should be mounted with the connector at the bottom so as to reduce the possibility of water ingress. Step 6. Route the display cable up and along the top of the instrument cluster and secure the display housing to the top of the cluster using double-sided adhesive tape provided. Take care not to make sharp bends in the display cable, as it is quite fragile. Step 7. Making the power connections: The black earth wire should be secured under the lower left hand instrument cluster screw as shown in the photo below. The red wire for the 12v supply can be connected to any convenient ignition switched feed. On the year 2000 model illustrated, it was found that the most convenient supply was that going to the front light cluster. The front light wiring harness connects to the main loom using a black rectangular connector located to the left of the fuse box. The 12v supply was found on the thick orange/red wire. Other year models may use a different colour code and if in doubt, reference should be made to the appropriate service manual. Splice the red wire into the lighting power feed using the 3M ‘Scotchlok’ connector provided. Step 8. Testing the display: check that the bike is in neutral and turn on the ignition. The display should read ‘N’. The function of the standard neutral lamp should be unaffected. If possible select 1st and 2nd gears and confirm that the display reads correctly. It will be unlikely that the other gears can be selected unless the engine is running, but if the display is reading correctly in Neutral and 1st then it is fair to assume that all is functioning correctly. Step 9. Ensure that no wires have been trapped or incorrectly routed, then replace the insert panel, the fairing and the seat. Remember that the fairing is secured using two different types of screw! Step 10. Finally, road test the bike to ensure that the display is reading correctly in all gears. The display should be easily visible, both from under the screen with you head down, or through the screen with you head up.
TONY, 47, is a sales manager based in Bradford, Yorkshire, and bought a 1999 Hayabusa brand new. He sold it a few years later, but bought an ’03 model after missing the old bike so much. Gary: “I bought a new Hayabusa in 2004 and was a bit disappointed at first, as the power delivery was a little notchy somehow and I also thought that the clutch could have been better. “The throttle response smoothed out a bit as I ran the bike in, but I was still surprised that Suzuki don’t seem to have done much to the bike over the last five or six years. I mean, apart from restricting the top end and changing the colour schemes each year, it’s much the same bike. “Since buying mine, I’ve spent a fair bit on it, with a one-off titanium exhaust system, modified airbox, wavy discs, aftermarket six-pots, braided lines, small clear indicators, carbon inserts on the bodywork and so on. “Overall, I reckon that fitting the exhaust, de-seaming the innards of the airbox, dyno time, plus the new calipers have made the biggest difference to the performance of the bike. It now goes and stops loads better – sounds great too. I think just dumping the stock exhaust system probably saved about 4kg in weight.” Ian: “The W-plate Hayabusa I had ended up being transformed from a standard road bike – admittedly an insanely fast one – into an almost unrideable missile. Freakin’ good fun, though – even if I was only getting 80 miles out of each tankful! “The 2004 Busa I have now is more laid back and easier to ride, plus it’s a showcase for the accessories and stuff I can do in the shop: polished wheels, wavy discs, braided lines. Plus I put a Blue Flame can on it, set the bike up at the dyno and re-chipped the ECU so it doesn’t stop at 186mph. But I’m still not 100% happy with the brakes – I really think the Hayabusa needs more stopping power.” Tony: “There’s no great difference in performance between the older Hayabusa and the later, so-called ‘restricted’ versions. The only restriction is that at 186mph the ECU tells the fuel injectors to cut the supply to one cylinder, which stops it from going any faster. Otherwise, there’s still the same amazing amount of power, although the 2003-on bikes feel a touch smoother in their overall throttle response, due to their remapped fuelling and ignition. “The brakes are equally weak on both models and fitting braided lines and some different pads is a must if you want serious stopping power. Apart from that, I would say the performance is more than most riders will ever need on the public road.” OLD Hayabusas hold their value well on the secondhand market
Installing the Ghetto Kit for the Suzuki Hayabusa Parts in included in Kit… Polish alum intake/silicon hose Air cleaner Stainless header 38mmTial Waste Gate FMU BEGI 3 Billet fuel rail inserts Oil feed Line Charge tube (Polished) Oil drain line Vac hose Boost & Fuel Gauges ( Carbon Fiber Look by Auto meter ) Check valves Fuel pump EFI fuel hose Dump Pipe & Wastegate Pipe Manifold straps Mits turbo custom made. Special Tools Required: 1.) 23/32 drill bit – f0r fitting in oil pan 2.) ball end 6mm allen wrench – for exhaust header 3.) silicone for fittings (Permatex Ultra Black or equal) 4.) 15amp fuse (should already have extra one in fuse box) 5.) 6mm tap for blocking Pair (Air Supply) System ~ i.e. emission system and 4 - 6mm x ½ long bolts 6.) 2” box hole drill bit for gauge holes Optional parts not supplied: 1.) Mobil Synthetic 15W-50 Motor Oil (Red Cap) or equal recommended. 2.) Oil Filter 3.) Anti-Freeze if you do not want to re-use your existing gaskets… 4.) oil pan gasket 5.) exhaust gaskets 6.) clutch cover gasket 7.) fuel rail rubber gaskets (6) 1.) Preparing bike for install, remove the following… a.) Bodywork side panels, underbelly fairing, gas tank, upper inner fairings b.) Pair (Air Supply) System and disregard. tap and use 6mm bolts to block openings c.) air box and disregard (remove air sensor first) d.) exhaust system and disregard e.) remove oil cooler, brackets and oil lines and disregard f.) remove radiator g.) remove clutch line support bracket (leave line connected) h.) remove oil pan i.) remove throttle bodies 2.) Replace 10amp fuse for “FUEL” with 15amp fuse. 3.) Install Heavy Duty Clutch Springs. 4.) Modify Oil Pan for oil return line from Turbo by drilling a 23/32 hole on the left front side. Remove any metal shavings and install fitting facing front of bike. Apply silicone to threads of fitting first (typical for all threaded fittings). Re-install Oil Pan. 5.) Remove Oil Plug (reducer) behind Oil Filter using 8mm allen. Re-install new oil filter.